Dallas College
PET Bottle Recycling Machine.
Research Journey
Introduction
I began by enrolling in Dallas College’s Basic Undergraduate Research Skills Training, an intensive two-day program centered on CAD design, Arduino programming, and electrical components. After earning a high score on the program’s technical challenges, I advanced to a group of 20 finalists considered for the 10-week Advancing Research and Innovation in STEM Education (ARISE) program. I was ultimately selected as one of only eight students to conduct an independent research project and develop an engineering concept into a functional prototype within a $1,000 budget.
Engineering Solution
Project Overview
I designed and built a PET bottle recycling machine that converts discarded bottles into reusable 3D-printing filament through controlled heating and extrusion. I developed a dual-Arduino control system to manage the two core processes independently. The first Arduino regulates the Ender-3 hotend temperature through an EC11 rotary encoder, provides real-time feedback on an I2C OLED display, and uses green and red LEDs to indicate system power and the 230°C temperature limit. The second Arduino controls the speed of a NEMA 17 stepper motor through another rotary encoder while displaying real-time speed data on a separate OLED screen.
System Walkthrough
How the Machine Works
The machine guides one continuous PET strip through five controlled stages.
-
01
Cut
Bearings guide the bottle while the cutter produces a continuous PET strip.
-
02
Feed
The strip follows an aligned path toward the heated forming section.
-
03
Heat
The Ender-3 hotend softens the PET under closed-loop temperature control.
-
04
Pull
A geared NEMA 17 motor draws the material at an adjustable speed.
-
05
Wind
The finished filament collects on the spool for later 3D printing.
Embedded Systems
Two Independent Control Loops
One controller manages heat. The second maintains the filament pulling speed.
Thermal Control
Hotend Temperature System
An Arduino drives the Ender-3 hotend through an IRFZ44N MOSFET. The EC11 encoder changes the temperature setting, the OLED reports real-time temperature, and the LEDs communicate power and the 230°C limit.
Open full schematic
Motion Control
Stepper Motor System
The second Arduino sends STEP and direction commands to a TMC2208 driver. A rotary encoder adjusts motor speed, while the OLED displays the selected operating speed for the geared pulling system.
Open full schematic
CAD and Fabrication
Mechanical Design
Bottle Cutting System
The bottle rotates against guided bearings while the adjustable cutting assembly creates the continuous strip used by the hotend.
Hotend and PCB Enclosure
The printed enclosure organizes the OLED, encoder, switch, LEDs, and power interface. A separate bracket fixes the hotend in the filament path.
Motor and Spool Drive
The geared stepper motor supplies low-speed pulling torque while the spool captures the formed filament. The adjacent enclosure protects the motor electronics.
Bill of Materials
Prototype Cost
The complete parts list remained well below the program’s $1,000 limit.
| Component | Qty | Unit Price | Total Price |
|---|---|---|---|
| Creality Ender-3 Hotend Kit | 1 | $16.99 | $16.99 |
| IRFZ44 N-Channel MOSFET | 1 | $9.99 | $9.99 |
| I2C OLED Display | 1 | $15.99 | $15.99 |
| 1/2W Resistors | 1 | $13.99 | $13.99 |
| Capacitors | 1 | $9.90 | $9.90 |
| TMC2208 Stepper Driver | 1 | $18.99 | $18.99 |
| Rotary Pushbutton | 1 | $9.99 | $9.99 |
| I2C OLED | 1 | $14.99 | $14.99 |
| Barrel Jack Socket | 1 | $6.99 | $6.99 |
| 608 Ball Bearings | 1 | $5.99 | $5.99 |
| M8 Threaded Rod | 1 | $14.29 | $14.29 |
| M8 Nuts | 1 | $8.99 | $8.99 |
| M3 Button Head Screws (8mm and 40mm) | 1 | $23.94 | $23.94 |
| M3 Brass Inserts | 1 | $17.89 | $17.89 |
| M2.5 Button Head Screws (6mm) | 1 | $9.49 | $9.49 |
| M5 Button Head Screws (10mm) | 1 | $11.99 | $11.99 |
| GT2 60 Teeth Pulley 8mm Bore | 1 | $13.99 | $13.99 |
| Nema17 27:1 Geared Stepper Motor | 1 | $40.15 | $40.15 |
| Dia. 8mm × 200mm Shaft | 2 | $4.10 | $8.20 |
| M3 Nylon Standoffs | 1 | $9.99 | $9.99 |
| Arduino Uno Rev3 | 2 | $27.60 | $55.20 |
| 12V Power Supply | 1 | $9.99 | $9.99 |
| Project total | 24 | $347.92 |
Research Communication
Final Research Poster